Winegard TV Receiver SK 3003 User Manual

DIRECTV^®Receiver Setup for SK-3003

The following instructions assume that the TRAV’LER® antenna has found and locked onto satellites 101°,

110° and 119°. There should be an asterisk next to 101°, 110°, and 119° on the TRAV’LER interface.

In most DIRECTV receivers, the setup is done through the “Repeat Satellite Setup” option in your receiver

menu. The following instructions are based upon an H24 receiver. If your receiver differs from the options

shown, you may need to consult your receiver manual. The wording and display used in your receiver

may differ slightly.

For Help, Call 1-800-788-4417

Press Menu on

your remote,

and then select

Parental, Fav’s &

Setup.

Select System Setup.

In your receiver

Menu, you will

need to identify

the Satellite

Menu. The

Satellite Menu

will have an

You may be

required to press

the DASH (-)

before proceeding

(underneath #7 on

the remote).

option for

Satellite Setup.

Set Dish Type

for 02: 3-LNB

(18”x20”).

Your installation

will be verified.

Set the Switch

Type for

02: Multiswitch.

Press Continue.

Errors may be

Select Continue.

displayed on the

Installation Status

screen. This is

normal to see one

or two boxes with

an X instead of a .

Select Continue.